|
|
Digital Library of the
European Council for Modelling and Simulation |
|
Title: |
Analytical Model Of Eddy Current-Based Device Meant To The Conductive
Materials Sorting |
|
Authors: |
Maria Brojboiu, Lucian Mandache |
|
Published in:
|
(2011).ECMS
2011 Proceedings edited by: T. Burczynski, J. Kolodziej, A. Byrski, M. Carvalho. European Council for Modeling and Simulation. doi:10.7148/2011 ISBN:
978-0-9564944-2-9 25th
European Conference on Modelling and Simulation, Jubilee Conference Krakow,
June 7-10, 2011
|
|
Citation
format: |
Brojboiu, M., & Mandache,
L. (2011). Analytical Model Of Eddy Current-Based Device Meant To The
Conductive Materials Sorting. ECMS 2011 Proceedings edited by: T. Burczynski, J. Kolodziej, A. Byrski, M. Carvalho
(pp. 381-386). European Council for Modeling and Simulation. doi:10.7148/2011-0381-0386 |
|
DOI: |
http://dx.doi.org/10.7148/2011-0381-0386 |
|
Abstract: |
The developed analytical model
refers to an electromagnetic device intended for sorting conductive
materials, as in the waste management domain. The main component of the device
is a probe coil with ferrite open core that has to be placed near the piece of conductive material subject to sorting.
When the probe coil is supplied by a mean frequency voltage source, eddy
currents are induced into the tested conductive media,
the measured impedance depends on its physical parameters. The influence of
the physical parameters of the coil probe and of the relative position of the
probe coil and material are also analyzed. Based on our new analytical model
of the system, many numerical results corresponding to a wide range of
working parameters have been investigated, in order to identify most proper
possible implementations in engineering practice. |
|
Full
text: |
|
